If you live in Multan, you already know the drill. The fan stops, the WiFi router blinks off, and someone in the house shouts “bijli chali gayi” before you’ve even checked your phone. The frustrating part isn’t the outage itself — it’s not knowing when it’s coming or how long it will last.
That’s exactly what this guide is for. Below you’ll find the MEPCO load shedding schedule Multan 2026 pattern, a proper area-wise breakdown instead of vague ‘it depends’ answers, and a simple way to check your own feeder’s timing today — not last month’s schedule someone forwarded on WhatsApp
How MEPCO Load Shedding Actually Works
Before jumping into timings, it helps to understand one thing MEPCO doesn’t advertise clearly: load shedding in Multan is not decided city-wide. It’s decided feeder by feeder.
A feeder is basically the specific power line feeding your street or colony. MEPCO groups feeders into loss categories based on how much electricity is billed versus how much is actually recovered from that area. Feeders with low losses and good bill recovery get shorter, more predictable outages. Feeders in areas with high theft or unpaid bills get cut for longer, sometimes without much warning.
This is also why your cousin two colonies away might have power while your street is dark — you’re simply not on the same feeder.
MEPCO Load Shedding Schedule Multan 2026 – Area Wise Timing
Here’s how the situation generally breaks down across Multan right now. Timings shift with weather and overall demand, so treat this as a realistic range rather than a fixed clock.
Multan City – Urban / Better-Managed Feeders Areas like Gulgasht Colony, Bosan Road, Cantt, New Multan, and Shah Rukn-e-Alam Colony typically fall on low-loss feeders. Expect around 4 to 6 hours of scheduled outage per day, usually split into two shorter cuts rather than one long block.
Multan Outskirts / Peri-Urban Areas Localities such as Shujabad Road, Sher Shah, Chowk Kumharanwala, and the villages bordering the main city sit on higher-loss feeders. These areas can see 8 to 12 hours of load shedding daily, especially during peak summer demand.
Industrial and Commercial Zones Industrial feeders are usually protected from the worst of the cuts since continuous supply matters for factory output, but short scheduled interruptions still happen, typically in the 2 to 4 hour range.
Rural Feeders Around Multan District Agricultural and rural connections tied to tube well feeders often face the longest outages, sometimes touching 10+ hours in peak summer months, since these feeders carry the highest combined demand and loss rates.
Keep in mind — these numbers describe the general pattern, not a guaranteed timetable. The only way to get your street’s actual schedule is to check your specific feeder.
Check Your Exact MEPCO Load Shedding Schedule Today
Skip the guesswork. Here’s the fastest way to find your real feeder timing:
- Locate the 14-digit reference number on your latest MEPCO bill, or check your MEPCO bill online here first if you don’t have a copy handy.
- Visit the official CCMS feeder details portal, which is run by PITC and connected directly to MEPCO’s system.
- Enter your reference number, or search by city, grid, and feeder name if you know them.
- The portal will show your feeder’s current load shedding hours, updated based on live system conditions.
This is the only source that reflects your actual street, not a citywide average. If your bill hasn’t been generated yet or you can’t find your reference number, our MEPCO bill calculator can also help you estimate charges while you sort out your documents.
Planned vs Unplanned Outages – Know the Difference
Not every blackout is “load shedding,” and knowing the difference saves you a wasted complaint call.
| Planned Load Shedding | Unplanned Outage | |
|---|---|---|
| Cause | Demand exceeds supply on your feeder | Transformer fault, tripped line, storm damage |
| Duration | Usually predictable, 2–12 hours depending on area | Unpredictable, could be minutes or a full day |
| Warning | Follows a rough daily pattern | No warning at all |
| What to do | Plan around it using your feeder schedule | Report it immediately as a fault |
If your power stays off well beyond what your feeder schedule shows, it’s likely a fault rather than scheduled shedding — and that’s worth reporting rather than waiting out.
How to Prepare for Load Shedding in Multan
A few practical habits make the outages far less painful:
- Charge everything before your scheduled cut — phone, power bank, and any UPS batteries, so you’re not caught off guard.
- Run heavy appliances during “on” hours — washing machines, irons, and water pumps are better timed when supply is stable rather than right before an expected cut.
- Consider a small backup setup — even a basic UPS covers lighting and fans through a 3–4 hour gap, and if you’re looking at longer-term savings too, our guide on the best ways to save electricity in summer covers habits that lower both your bill and your dependence on grid supply.
- Don’t trust random WhatsApp schedules — group forwards are almost always outdated. Stick to the CCMS portal for anything current.
What to Do If Load Shedding Feels Unfair or Excessive
If your area is consistently getting cut far more than nearby colonies, it’s worth raising it directly rather than assuming nothing can be done. Keep your reference number and a note of the outage timings, then reach out through the MEPCO helpline numbers and complaint centers we’ve listed separately — it walks through the fastest way to get a complaint registered instead of waiting on hold.
And if the outages are throwing off your billing cycle too — meter readings delayed, bills arriving late, or usage looking off — our post on what happens when a bill isn’t generated on time is worth a quick read as well.
Frequently Asked Questions
Is there a fixed daily load shedding time in Multan? No. MEPCO doesn’t publish one single citywide timetable. Timing depends on your specific feeder, current demand, and system conditions, which is why checking by reference number gives a far more accurate answer than a general schedule.
How do I find out which feeder serves my house? Your feeder is tied to your meter connection. It’s printed on some bills, or you can ask your local Sub-Divisional Office (SDO), or simply search the CCMS portal using your reference number, which will show the feeder automatically.
Why does my area have longer load shedding than nearby colonies? It comes down to feeder loss categories. Areas with higher electricity theft or unpaid bills on their feeder tend to face longer, more frequent cuts, even if they’re just a few streets away from a better-managed feeder.
Does MEPCO load shedding happen at night in Multan? Yes, though nighttime cuts are usually shorter than daytime ones since overall demand drops after peak evening hours. Your feeder’s exact overnight pattern will still show on the CCMS portal.
Can I check MEPCO load shedding schedule without a reference number? It’s harder, but you can search by city, grid name, and feeder name on the CCMS portal instead. Calling the MEPCO helpline is also an option if you’re unsure of your feeder details.
Is the “Roshan Pakistan” app reliable for MEPCO load shedding updates? It aggregates schedules from various DISCOs including MEPCO, but for anything urgent or time-sensitive, the official CCMS portal remains the most accurate source since it pulls live feeder data.
Load shedding in Multan isn’t going away overnight, but knowing your actual feeder schedule — instead of guessing — makes it a lot easier to plan your day around it. Bookmark this page, check back for updates, and don’t forget to check your latest MEPCO bill or download a duplicate copy while you’re at it.
